Features
Power_electronics Features

GaN-based switcher ICs empower next-generation power products - issue 1/2020
There have been a number of disruptive advances in the power electronics community over the last 20 years....
More details...
Linear voltage regulators operate at automotive temperatures
Designed for high reliability, high temperature applications, the CMT-Antares is Cissoid's latest regulator.
More details...
Power Electronics Europe News
 
Power supply is for high peak load power supply in medical laser applications
It is designed for high peak load applications in the medical sector and delivers 2.25kW repetitive peak power to medical lasers with high efficiency, says the company. It complies with medical safety standards and for has a thermo-controlled cooling system for quiet operation.

It is for use in medical laser equipment from cosmetic to general surgery procedures which require power supplies to deliver very high peak energy levels to the laser or discharge tubes. This repetitive, high peak energy generates electromagnetic radiation and line disturbance which can jepoardise patient and operator safety.

Laser devices usually have less than a millisecond pulse width, whether it uses pulsed CO2 or Erbium YAG lasers, UltraPulse (a very short pulse duration with high pulse power and very high influence) or SuperPulse (medium pulse duration with medium pulse power) technologies. This means that the equipment is very fast firing, requiring the power supply to be able to deliver high energy levels during the pulse, but also able to restore energy for the next one. The 2.25kW AC/DC capacitor charger SMM3000A80024C complies with the medical safety standard IEC60601-1 3rd and provides a level of protection, primary to secondary main output of 2xMOOP (means of operator protection) and 2xMOPP (means of patient protection) to auxiliary output. To accommodate different capacitor banks and applications, the output voltage can be adjusted from zero to 800V DC (600V DC nominal) with an output current of 5.5A at nominal.

An automatic current controller ensures the power envelope is always within safe limits, reducing capacitor ageing and overstressing of components. An integral microprocessor constantly monitors the charging status, reporting end of charge and discharge level, as well as all protection warnings due to abnormal operation such as over-temperature, over-voltage and current.

To reduce line disturbances there is a high efficiency power factor corrector (PFC), soft-start circuitry, filtering and is housed in a six-sided shielded case. To minimise audible noise, the fans are thermo-controlled, regulating speed to the minimum required for normal, safe operation.

An auxiliary output voltage of 24V DC reduces the need for an additional power supply to power laser controller and interfaces. For additional power, the SMM3000A80024C can be connected in parallel.



View PDF
 
Go Back   
Newsletter sign up

Sponsors