Power_electronics Features

Benefits of CoolSiC MOSFETs in Bi-Directional Inverter Applications - July 2021
With the move to renewable energy, there is an increased focus not only on generation but also storage, to make the most of the intermittent supply from wind and solar. Batteries are the common...
More details...
Power Electronics Europe News
600W full brick converters are suitable for distributed power architectures  

The economical modules are packaged in the industry standard full-brick form factor, and offer high useable power and a robust design suitable for the demands of distributed power architectures, says the company. Applications include data communications, telecommunications, and test and measurement equipment.


The PCB mounted, industry standard, full-brick footprint measure 116.84 x 60.96 x 13.21mm. The integral baseplate allows the 12V model to operate at 500W in an ambient temperature of 52°C, with just 2m/s airflow. The use of an external heatsink or cold plate further extends the thermal performance, adds the company. Efficiencies are up to 94%, to reduce internal power losses.


Two output voltages are available, for driving point of load (PoL) converters. The 12V 50A model has a wide 7.2 to 13.2V adjustment range; the 9.6V 58A version can be set between 5.76 and 10.56V. Both models accept a 36 to 75V DC input and can operate in temperatures of -40C to 125°C. Output trim and remote sense are provided as standard.

Input to output and input to baseplate isolation is 1,500V DC, with an output to baseplate isolation of 500V DC.


Safety certification includes IEC/EN 60950-1, UL/CSA 60950-1 with CE marking for the Low Voltage and RoHS2 Directives.



View PDF
Go Back   
Newsletter sign up