Features
Power_electronics Features

BEV advancements are driving sales, but vehicle safety and reliability will ensure long-term viability
Innovative power architectures using power modules provide power redundancy and improve overall safety and system performance By Patrick Kowalyk, Automotive FAE,Vicor
More details...
AC/DC power factor correction module offers up to 1,512W
A full brick package developed by TDK-Lambda, the PF1500B-360, is for high voltage distributed power architectures
More details...
Power Electronics Europe News
 
High capacity industrial battery is for UPS
Suitable for use in UPS and similar high discharge rate applications, the battery typically provides up to 40% extra high-rate discharge capacity when compared with standard NPL series batteries.
 
Nominal 10hr rate capacity is 140Ah to 10.8V at 20°C with 10min rate constant power of 4250W to 9.6V at 20°C. Standby life expectancy is up to 10 years (design life at 20°C) and EUROBAT classification is high performance, 10 to 12 years.
 
The battery features a UL94HB ABS case material as standard with flame retardant option available for UL94V0 applications. The battery can be installed and operated in any orientation except permanently inverted and complies with IEC61056 and IEC60896-21/22. Case dimensions are 341 x 173 x 281mm with typical mass of 49kg.
 
Operating temperature is -15 to 50°C (charging) and -20 to 60°C (discharging). Optimum storage temperature in fully charged condition is from -20 to 50°C. Additional specifications include low self-discharge characteristics during storage, maximum discharge current of 840A for 1s or 420A for 1min and impedance of 2.7mΩ measured at 1kHz.
 


View PDF
 
Go Back   
Newsletter sign up

Sponsors